Zinc Alloy Air Pump Housing

 

Zinc alloy die casting has played a decisive role, so Zinc alloy air pump housing play an important role in many areas of our lives. Either hidden in it, or impressive. There is a market for all areas where a high level of stability, good looks and a natural feel are required.

 

The reasons are various. Zinc has a low melting point, very high strength values, and good corrosion resistance. Components can be produced with extremely thin walls, slim and dimensionally accurate, and are distinguished by excellent surface properties and coatability. Furthermore, production on the hot chamber die-casting machine is extremely environmentally friendly, as the zinc die-cast parts are 100% recyclable.

 

Production and maintenance costs, energy and material consumption. Efficient production involves many details, the first priority being the rational use of resources and available potential. Don't forget: the time factor.

 

In this respect, zinc alloy die casting offers several advantages. Combined with relatively low die-casting temperatures, zinc alloy die-casting enables high productivity - saving time. The hot chamber process does not require external preheating for melting, and the casting process can be completed with low energy consumption. Using sophisticated and careful mold design capabilities to achieve complex geometries, process cost savings can be achieved as parts can be precision cast, avoiding the need for frequent rework operations, and the quickest possible joining of parts, This is another weight to achieve rapid assembly.

 

If you need to customize Zinc alloy air pump housing, please contact us.

 

 

Why do some zinc alloy die castings have black spots when they are polished?

The biggest possibility comes from the release agent, spray too much release agent or the organic content of the release agent is too high. Some of these organic substances are reduced to carbon elements at the temperature of hot-melt zinc.

 

Why is zinc alloy die-casting thin-walled products easy to crack?

It can be analyzed from the following points: 1. The use of zinc alloy die-casting materials, try to control the proportion of waste not to exceed 30%; 2. The ejection force of the die-casting mold is unbalanced; secondly, the unreasonable design of the cooling water causes the temperature of the die-casting mold to be unbalanced 3. Improper selection of die-casting process parameters.

 

http://www.xinxdao.com/